#MACRIUM REFLECT WINDOWS 10 KEY ZIP FILE#
#MACRIUM REFLECT WINDOWS 10 KEY PRO#
#MACRIUM REFLECT WINDOWS 10 KEY SOFTWARE#
#MACRIUM REFLECT WINDOWS 10 KEY PLUS#

See Figure 6 and look in the bottom left corner for the Red X with “Delete Existing Partition” button.

Note: If imaging a T5810 that has an SSD instead of a mechanical HDD, you will have to select each partition individually in the Destination section and select the Red X “Delete Existing Partition” before proceeding with the imaging process.

The Destination should now be the drive you want to overwrite as seen in Figure 6.

If you haven’t done so, please shutdown the system and remove the drives so you don’t accidently overwrite other media. There should only be one drive you can select if you removed the drives as stated in Part 2.1.

Navigate to the flash drive and select the image you are applying to the system and click Open.

Macrium Reflect defaults to the Restore tab, so just make sure that tab is always selected when applying the image.

#MACRIUM REFLECT WINDOWS 10 KEY SOFTWARE#

It will take a moment to load the software and will boot to Macrium Reflect to begin the image process.

#MACRIUM REFLECT WINDOWS 10 KEY PRO#

Power on the Surface Pro 4, hold down the Volume Minus button and press and release the Power button.

Power on the Surface Pro 3, it will take a moment to load the software and will boot to Macrium Reflect to begin the image process.

Power on the Surface Pro 2, hold down the Volume Minus button and press and release the Power button.

Press and hold the power down button to shut down the Surface.

On Surface Pro 3 there is an additional step, to Configure Alternate System Boot Order ( Figure 1 #2).

Click the Enabled button next to Secure Boot Control and select Disable d ( Figure 1 #1).

#MACRIUM REFLECT WINDOWS 10 KEY PLUS#

On Surface Pro 2 and Surface Pro 3, hold down the Volume Plus button and press and release the Power button.For Surface devices, use a USB adapter to plug in the Macrium Reflect Technician USB, Keyboard, and Mouse.For the TC-10 hit Delete key and navigate to Save and Exit and under Boot Override select the USB option to boot to. Select the appropriate flash drive option and hit enter to boot to Macrium Reflect. For non-Surface systems: To boot to the Boot Menu press F12 for Dell systems and ThunderVR systems, F10 for Knoll Creeks and Hunter Caves, and F6 for MS Servers.Highlight the flash drive you inserted and press enter to load the software. For any non-Surface system, plug in the flash drive that contains the Macrium Reflect Technician USB bootable files.For example, remove media drives from the server, remove drive bays from laptops, and/or remove media drives from desktops.On the system that will be imaged, shutdown the system and remove any non-OS drives.Part 2 – Booting to Macrium Reflect from Flash Drive The image files can be downloaded from Catapult. Drag and drop the necessary image files to this drive.Take a second flash drive or external hard drive – this one should be 64GB or larger – and plug into the system.Remove the flash drive and plug into the system that is about to be imaged.Drag and drop the 15 files and folders from the zip to the flash drive.

#MACRIUM REFLECT WINDOWS 10 KEY ZIP FILE#

Open up the zip file that contains the Macrium Reflect Technician USB files.This will take a few moments to complete. Under File System, make sure it says Fat32, for volume label you can name it whatever you want, make sure Quick Format is selected, and then click Start.This will completely erase whatever is on it so backup files if they are important. Go to My Computer and right click the inserted flash drive and select format. Plug in a flash drive (no bigger than 32GB) on any system.Download the ver 7.3.5.5.5 Macrium Reflect Technician USB files.

Macrium reflect windows 10 key